Solar assets and building envelopes share one expensive problem: glass surfaces that quietly lose performance. Dust, chemical fallout, oily metal particles, bird droppings, salt spray and cement haze settle on photovoltaic cover glass, while ordinary architectural glazing lets short-wave and long-wave infrared heat pour into interiors. Yucheng Special Glass Co., Ltd. addresses both issues from a single technical base — functional coating chemistry that we formulate, apply and industrialize ourselves.
Dirty Modules Are a Financial Problem, Not a Housekeeping Detail
PV modules are circuit boards under glass. When the cover glass stays coated with chemical pollutants from industrial zones, dust from cement plants, bird droppings around fishery-solar sites or salt spray on offshore arrays, output drops and service life shortens dramatically. In heavily polluted locations without regular cleaning, module life can fall to three to five years. Cleaning robots are expensive, handle only part of the dust problem and rarely close the investment case. In Europe and North America, labor costs make routine washing impractical, and installations often reach only around eight years of useful life.
That is the gap we build for: a long-life self-cleaning layer that keeps the mandatory anti-reflective performance intact instead of trading one benefit for the other.
Two Functions in One Coating: Anti-Reflective Plus Super-Hydrophobic
Uncoated rolled PV glass typically transmits about 91.5% of light; after anti-reflective coating, transmission rises to 93%–93.5%, and every 1% of transmission is worth roughly 0.5%–1% of power generation. Our product is a two-in-one anti-reflective and super-hydrophobic self-cleaning coating liquid: it satisfies the mandatory anti-reflective requirement and adds durable self-cleaning on top. Measured film hardness exceeds 5.5H with a water contact angle above 120°.
Because the liquid is designed for use directly inside PV glass plants, it can be applied on the more than 1,200 existing coating lines in China rather than depending on our own capacity — a fast route to volume for module makers and glass processors. We have already begun small-batch production using our ARF coating technology with a major module manufacturer.
We deliberately stayed with super-hydrophobic chemistry. Photocatalytic hydrophilic films require both water and sunlight to break down organics, suit only a narrow set of sites, and force a trade-off: raise the catalytic activity and anti-reflective performance falls; protect the anti-reflective performance and catalysis fades. Our hydrophobic route removes that compromise.
Field-Applied Retrofit: What the Sample Data Shows
Existing plants represent the largest near-term market — more than 1,200 GW of installed PV capacity in China alone. For these sites we supply the same coating liquid in a manual on-site application process, and the platform can serve both new-build and aging plants. Competitor resin-type products generally require hydrofluoric acid etching of the panel, which destroys the original anti-reflective layer, so they cannot be used on new installations.
Commissioned sample projects between August 2025 and May 2026 show the effect across pollution types. A Qingdao animation industrial park site (light floating dust plus bird droppings) recorded a 7.41% generation gain; a Yantai machinery plant with oily metal dust recorded 7.33%; a Dalian container plant with heavy rust pollution recorded 11.97%; and a Qingdao industrial site with heavy rust recorded 8.36%. At a Zouping electronics plant with heavy aluminum powder pollution, a Dalian machinery plant with iron and coal dust, a second Dalian plant with heavy rust and a Hebei cement plant, observation showed sharply reduced soiling, with new contamination largely washed away by rainwater. More than 20 projects have been undertaken in this program.
For owners, the economics are simple: the value of the additional generation typically recovers the application cost within about 18 months, after which the gain continues for two to three years or more while washing frequency and maintenance spend fall. Our coating is positioned at roughly 60% of leading competitors' pricing.
Solar Control Glass: Measured Spectral Performance
Effective solar control requires strong blocking in both the short-wave infrared band (780–1400 nm) and the long-wave infrared band (1400–2500 nm). Our Shield 1 coated glass is compared below against common single-glazed options, based on our product data.
5 mm extra-clear white glass: SHGC 0.87, UV blocking 13%, visible light transmission 87%, short-wave IR blocking 16%, long-wave IR blocking 17% — essentially no solar control or insulation benefit.
5 mm silver-free Low-E (D50): SHGC 0.53, UV 35%, VLT 66%, short-wave IR 62%, long-wave IR 70% — partial performance.
5 mm F-green tinted glass: SHGC 0.63, UV 36%, VLT 81%, short-wave IR 65%, long-wave IR 58% — some IR rejection but weak insulation.
Yucheng 3 mm white glass, single-side coated (Shield 1): SHGC 0.32, UV blocking 77%, VLT 60%, short-wave IR blocking 99% and long-wave IR blocking 100%, with visible light transmission adjustable from 60% to 85%. The coating is an oxide film, so its performance does not degrade as long as the base glass remains intact.
This is the difference between needing a blackout curtain and not needing one. Shield 1 can be supplied as monolithic glass or built into laminated and insulating units, and it serves both new curtain wall projects and refurbishment work.
Applications and Technical Depth
Beyond PV cover glass and architectural glazing, self-cleaning coating can be combined with solar control on building and automotive glass so that one surface delivers both functions. Our technical reserves include automotive solar control, hydrophilic and hydrophobic coatings, antibacterial coatings, AG (4A grade) coating and JG application technology.
Why Work With Yucheng
We own the core coating formulation and also design and build the production equipment. A flat glass roller coating line is already operational in Qinhuangdao, and a dip coating line is under construction. Future lines are planned in other Chinese provinces and overseas to reduce logistics and tariff costs, raise capacity and support regional partners.
For distributors, glass processors, module makers and EPC contractors, this means a supplier who can discuss formulation, line integration and field application with the same team.
Contact
To discuss coating supply, OEM production on your existing line, retrofit programs or solar control glass supply, talk to us directly:
YUCHENG SPECIAL GLASS CO., LTD.
Contact: Ms. Liu / Maggie Lau
Address: Building G, 16F, International Innovation Park, Laoshan District, Qingdao, Shandong, China
Phone: 17660616888
Email: yuchengglass2025@126.com
Website: www.yucheng-glass.com

